9 May SikaGrout® 1. 1/4. C onstruction. SikaGrout® SikaGrout® High Strength shrinkage compensated cementitious grout. Product. Specialist Construction Supplies for Repair, Maintenance, Building & Infrastructure. Sikagrout Data Sheet. Specification notes. Product: Sikagrout SikaGrout DIVISION 3 – CONCRETE. Section – Grouts. Part 1 – General. Summary. A. This specification describes the grouting of cavities, voids.
|Country:||Saint Kitts and Nevis|
|Published (Last):||13 November 2006|
|PDF File Size:||10.69 Mb|
|ePub File Size:||3.19 Mb|
|Price:||Free* [*Free Regsitration Required]|
Collect in appropriate container. Do not commence fogging until initial set has been reached. Use either a slow speed drill set at – rpm with a clean, rust free, mixing paddle, standard mortar or concrete mixing equipment, or purpose built cement grout mixing equipment. Centre or locate the bolt in the desired position, using shims if necessary, and then leave undisturbed until the Sika Grout sikagrout 212 set.
Remove affected person to fresh sikagrout 212 immediately and contact a physician.
Approximate Flow Distance in cm. Sika Grout can be used to fill voids up to mm in sikagrout 212. Uncured material may be removed with water. Push the anchor bolt into the hole and sikagrout 212 skkagrout gently to the bottom, displacing the Sika Grout and filling the annulus around the bolt. Ensure that sufficient grout is available to maintain the hydrostatic pressure throughout the grouting operation until the grout level is sikagrout 212 the bottom level of the base plate.
SikaGrout – Everbuild
The quantity of sikagrout 212 added should not exceed one 1 part of aggregate to one 1 part of Sika Grout by weight. Contains Portland cement and sikagrout 212 free silica. Mechanical mixing is preferred for quantities greater than 1 bag.
In practice, the differences in materials, substrates and actual site conditions are such that no warranty in respect of merchantability or of fitness for a particular purpose, nor any liability arising out of sikagrout 212 legal relationship whatsoever, sikagrouut be inferred either from this information, or from any written recommendations, or from any other advice offered. Remove uncured Sika Grout from tools and equipment with water.
All orders are accepted subject to our current terms of sale and delivery which are available on request. DO not attempt to add sikavrout Sika Grout with the bolt in place.
Remove any excess water just prior to placing the grout. Use of an approved dust respirator, safety goggles and chemical resistant gloves are recommended. The correct quantity of Sika Grout required to completely fill the annular gap between sikagrout 212 bolt and the sides of the hole should be determined before installation is attempted. Place Sika Grout within 30 minutes of mixing. The use sikagrout 212 standard concrete curing techniques, such as light water fogging for 72 hours or the application of a sikagrout 212 water based curing compound is recommended on all exposed surfaces of Sika Grout Mixing can be achieved either manually or mechanically.
Add the required amount of 221 to the mixing vessel and then add Sika Grout The expansive properties of Sika Grout will be severely reduced if heat is introduced to the mixed product via warm batching water, hot storage conditions of Sika Groutand sikagrout 212 substrate and ambient temperatures. Volume Yield per 25 kg bag. Dispose of in accordance with local regulations.
For voids up to mm it is necessary to fill Sika Grout with a suitable well graded aggregate ranging in aikagrout from 3 mm up to 15 mm. Cured material can only be removed sikagrout 212.
Immediately remove contaminated clothing. Contact Sika for further health and safety information.
All surfaces should be brought to a saturated surface dry condition by presoaking with clean water for several hours sikagrout 212 grouting. Siiagrout care, as with handling any chemical construction product. If the Sika Grout does not fill sikagrout 212 annular gap evenly sikagrout 212 bolt insertion, withdraw the bolt and insert additional Sika Grout and re-insert the bolt.
Sikahrout thoroughly with soap and water. Width of gap to be grouted in mm. After establishing the consistency required, determine the water requirement per 25 kg bag see Table 2. Sika Grout is a one component, multi-purpose,freeflowing, expanding,cementitious grout.
Flush sikagrout 212 with water for 10 – 15 minutes and contact a physician immediately. Concrete grey when mixed.
For external applications, protect from rain until initial set has been achieved. For the structural grouting of: Users sukagrout always refer to the most recent issue of the Technical Data Sikagrout 212 for the product concerned, copies of which will be supplied on request, or can be accessed on the internet under www.
Mix for at least 3 minutes until a uniform, lump-free consistency is obtained. Protect from direct sunlight. In most cases, sikagrout 212 bolt hole should be no greater than 15 mm larger in diameter than the bolt.
Sikagrout 212 clothing before re-use. Wash hands immediately after sikagrout 212. Water Requirement per 25 kg bag in litres. Sikagorut Company reserves itself the right to 2122 the formulation of Sika products if so required by new research and development.